Techinical Specification

Code legend: FILTERS

The filter codes start with letter F and the second letter shows the type:
Q = quarzite;
C = active carbon;
Z o M = zeolite

Models FQZ, FCA, FMIR designed for limited flow rates, are realized with fibreglass tanks and centralized valve. Models FQCT, FCCT, FDCT, designed for medium flow rates, are realized with carbon steel tanks and centralized valve. For the treatment of high flow rates, models FQST, FCST, FDST are realized with carbon steel tanks with diffusion plate and single valves.

The numerical part of the code indicates the diameter of the tank in mm. (E.g. FCST 1300: Active carbon filter, diameter 1,300 mm with single valves)

The tanks, provided with support feet and inspection doors, are completely realized with electrically welded, high thickness carbon steel and are internally treated with epoxy paints. External finishing is realized with antirust treatment and finishing in synthetic enamel.

Code legend: DOMESTIC SOFTENERS

Domestic water softeners which comply with the regulations of the law: DM 174

The codes of the domestic softeners start with letter D. The following pair of letters indicates the settings for regeneration control:
AT = ime based;
AT-V = volume + time based.

Digit 1 identifies boxed models, while 2 means double body. The numerical part of the code indicates the amount of resin (in liters) contained..
The suffix STC indicates that the softener is provided with a device for resin sterilization during regeneration, compliant with law (DPR 443 21.12.90), mandatory in case of drinkable water use.
The suffix DX indicates that the model is in “alternate duplex” version, while DXS indicates “alternate duplex mounted on skid” (e.g. DAT 1 V 28: softener with volume regeneration containing 28 litres of resin in boxed version).

Code legend: INDUSTRIAL SOFTENERS

The codes of the industrial softeners start with G, C and S
The following pair of letters indicates the settings for regeneration control:
VT = time based;
VT-V = volume + time.

The suffix DX indicates that the model is in “alternate duplex” version, while DXS indicates “alternate duplex mounted on skid”
The suffix STC indicates that the softener is provided with a device for resin sterilization during regeneration, compliant with law (DPR 443 21.12.90), mandatory in case of drinkable water use.

The numeric part of the code indicates the amount of resin contained (in litres), e.g. GVT 300: softener with time based regeneration containing 300 litres of resin, CVT-V 1200: softener with volume+time based regeneration containing 1,200 litres of resin.

The tanks: in models G, the resin tank is in fiberglass suitable for food, reinforced by linear, while models C and S, are in electrically welded, high thickness carbon steel and are internally treated with epoxy paints. External finishing is realized with antirust treatment and finishing in synthetic enamel.

Code legend: REVERSE OSMOSIS

The prefix of the reverse osmosis systems is ROT the following number indicates the flow rate in m3/h/10.
The suffix SR identifies the basic version, not provided with low pressure flushing system. (Example: ROT 120: 12 m3/h osmosis full version.)
The suffix SS identifies the version for the treatment of sea water or high salinity water.

Code legend: DEMINERALIZERS

The code of the demineralization systems is letter S preceded by the word DEMI the following number indicates the exchange capacity of the resin, e.g. DEMI S 30 means that the resin can detain up to 3,000 gm. of salts (in CaCO3)
The demi systems in standard version include two columns, a strong cationic one and a strong anionic one.

Code legend: HTM hardness control system

The hardness control systems: HTM 1.03, is provided with an electronic board and a control panel for quick and easy setting; it is provided as well with volumetric function by means of counter pulses.

Code legend: FLOATERS

Flotation for the reduction of fats and oils from waste water, the flotation units are able to reduce the COD also from waste waters containing light contaminants such as hydrocarbons or COD arising laundries and dry cleaners

Code legend: UV lamps

UV lamps of small, medium and high flow rates

Code legend: HYDROCYCLONES for sand

Filters for hydrocyclones desabbiazione well water

Code legend: Filters for arsenic FAS

Filters for the reduction of arsenic in tap water or well water

Code legend: Filters for drinking water Everpure

Code legend: UFT Ultrafiltration